Polyether Polyol PPG MW3500

BQ8145 is a 3500 molecular weight polyether polyol, This PPG3500 for Flexible Polyurethane Foam enjoys low VOC, is widely used in mattress foam, sofa foam, slab foam, etc.

お問い合わせを送る

PPG MW3500 is a kind of polyether polyol based on glycerol, this PPG3500 for Flexible Polyurethane Foam has no BHT and is used for mattress, cushion, furniture and other soft foam. Raw Materials of Sponges production-PPG3500 is suitable for low, medium and high density polyurethane foam.

BQ8145 mixed with inactive polymer polyols have suitable reactivity and high product application tolerance. In the early and middle stages of foaming, the foaming rate is moderate, and the latter is strong, which can meet the foaming needs of diferent density sponges in most environments.


	48±2
	Less than or equal to 0.05
	Less than or equal to 0.05
	5.5-7.5
	Less than or equal to 30

Viscosity mpa.s/25 degree	550-800

Flash point is above 200 degree centigrade (open cup method), flammable but non-explosive. In case of fire, put out with foams, dry powder, steam or water.

Store in new steal drums, 200KGS/drums.

BQ8145 is slightly hygroscopic and may absorb water. Containers should be kept sealed and protected from contamination of moisture and foreign materials.

The shelf life is 12 months. After that, the pre-test should be made before use.